Cold Fire
Cold FireTM is a multi-purpose fire suppressing agent that beats foams hands-down!
Completely 'green' and non-toxic, Cold FireTM puts out Class A, B, D fires of all types, hydrocarbons or polar solvents, metals, tires and asphalt fires.
Cold Fire works to remove heat and the Hydrocarbon Fuel source from the fire triangle.
Unlike some products Cold Fire™ will not damage structural paint surfaces or roofing materials, it is not an eye or skin irritant, and it will not clog valves, eductors or diminish the range of the hose-nozzle spray pattern.
Cold FireTM never expires, can put out ANY fire, can be used in low percentages, requires less cleanup, and puts the fire out faster, it is the most economical choice when using fire suppressing agents.
U.S. Forest Service approved agent for wildfire applications
- UL Listed Agent for Class A and B fires.
- EPA-SNAP (Significantly New Alternative Policy Program) listed.
- Considered an acceptable substitute to toxic foams and Halon.
- Non-toxic.
- Non-corrosive—product can be dumped directly into the Fire Appliance water supply. No need to flush out lines.
- Biodegradable.
- Unique thermal insulation capability. Helps to minimize heat exhaustion.
- Extinguishes fires rapidly and on contact.
- Prevents re-ignition when properly applied.
- Encapsulates and breaks down hydrocarbons; thereby reducing hydrocarbon smoke and increasing visibility.
- Enhances the penetration capability of water, extinguishing the fire faster, using less water, and thereby reducing water damage and water supply needs.
- No messy clean.
- Non-slip.
- Indefinite shelf life when stored in closed containers. Store in a booster tank, water pressurized units or closed loop system for use anytime.
- Extinguishes Class D fires.
- No specialized training required.
- No specialized safety equipment is needed.
- Non-hazardous and safe to handle and apply.
- Does not harm the environment, firefighters or fire victims.
- Ideal for Helicopter and fixed wing fire fighting
Testimonials
“We placed a 1.25% solution in the water tanks of our five engine companies so we could see what it would do on active structure fires. The Cold FireTM has been working great. It has been eliminating the usual heat that we encounter, which in one case, prevented serious injury to a person who had to be rescued by ground ladder. We have been using less water on these fires which has kept additional water damage to a minimum, and more importantly, fire extension has greatly been reduced.”
David A. LaFond - Chief, Holyoke Massachusetts Fire Department
“In my 27 years of fire fighting, no fire-fighting product has impressed me as much as yours. Cold FireTM lives up to, if not exceeds, all that was advertised. My first experience using Cold FireTM was at a brush fire approximately 100 ft. In diameter. Using my extinguisher with Cold FireTM, I was able to knock the fire down and control any further burn until the remainder of our response was on scene. I feel that Cold FireTM will definitely improve our fire fighting and reduce injuries to our members. This is a product that we will be using more and more in the future.”
- Ronald Schnall - Chief, Holbrook Fire Department
“I have personally used Cold Fire™ and seen it demonstrated numerous times, and I would highly recommend this product to any fire department.”
- Vince Price - Chief, Monticello Fire Department
“We run both our first-out engines with Cold Fire™ in the booster tank and it is a great time saver for even the little fires. It saves time in salvage and overhaul operations. With the help of your product we can extinguish sawdust piles and save us many long man-hours in trying to put them out with just water.”
- James Hinman - Chief, Romulus Volunteer Fire Dept.
